ATAGO RX-7000 i User Manual

56
• SCALE #001 (Brix) Settings
Item Factory default
SCALE NAME Brix
SCALE TYPE Brix
USER (conversion table) ―
USER SCALE UNIT ―
MODE 1
Continuous Measurements:
n
1
Wait Time 0
TEMP CONTROL
(ON/OFF)
ON (MODE-1)
TARGET Temp 20.00℃
Resolution 0.001(5000i-Plus), 0.01(5000i/9000i), 0.1(7000i)
LIMIT BAR (ON/OFF) ON
LIMIT BAR
(upper and lower limits)
-1.000 to 100.000 (5000i-Plus)
-1.00 to 100.00 (5000i/7000i/9000i)
USER ID Set in the measurement screen
SAMPLE NAME Set in the measurement screen
• SCALE #002 (nD) Settings
Item Factory default
SCALE NAME nD
SCALE TYPE nD
USER (conversion table) ―
USER SCALE UNIT ―
MODE 1
Continuous Measurements:
n
1
Wait Time 0
TEMP CONTROL
(ON/OFF)
ON (MODE-1)
TARGET Temp 20.00℃
Resolution 1.00000
LIMIT BAR (ON/OFF) ON
LIMIT BAR
(upper and lower limits)
1.32420 to 1.58000 (5000i-Plus/5000i)
1.29980 to 1.71500 (7000i/9000i)
USER ID Set in the measurement screen
SAMPLE NAME Set in the measurement screen

ATAGO RX-7000 i Specifications

General

Brand	ATAGO
Model	RX-7000 i
Category	Measuring Instruments
Language	English