ATAGO RX-7000 i User Manual

40
Printing SCALE Information
1.
Touch "SCALE" on the home
screen.
2. Touch the scale whose
information you wish to print.
Touch "EDIT.”
3. Check the "PRINT" box.
 A printout example of scale information
USER ID : HONDA
SCALE No. : 007
SCALE NAME : Weekly
SCALE TYPE : Brix
UNIT : %
MODE : 2
N (Number of continuous measurements) : 1
WAIT TIME : 0
TARGET TEMP (Target temperature) : 20.00℃
DECIMAL POINT (Resolution) : 0.001
LOW (Lower limit value) : -1.000
HIGH (Upper limit value) : 100.000
＊＊SCALE REPORT＊＊
MAY.30,2013 17:32 USER ID＝HONDA
SCALE No.= 007
SCALE NAME = Weekly
SCALE TYPE = Brix UNIT = %
MODE = 2 n = 1 WAIT TIME = 0
TARGET TEMP = 20.00
DECIMAL POINT = 0.001
LIMIT LOW = -1.000 HIGH =100.000
※
The scale information will be
printed immediately after
"ENTER" is touched.

ATAGO RX-7000 i Specifications

General

Brand	ATAGO
Model	RX-7000 i
Category	Measuring Instruments
Language	English