ATAGO RX-7000 i User Manual

35
Selecting a special scale
1. Follow the steps 1. through 3.
for "Selecting the Brix or nD
scale" on page 34.
2. Check a box to select the
scale and touch "ENTER."
Selecting a user scale
1. Follow the steps 1. through 3.
for "Selecting the Brix or nD
scale" on page 34.
2. Program the concentration
data points and
corresponding refractive
index values in the data
window.
3. Choose a unit of
measurement and touch
"ENTER" to save.
※
Touch the arrow on the lower
right corner to forward to the next
page of the special scale list.
※
Each user scale requires a
minimum of 3 data sets to be
programmed.
※
Choose from the 6 unit options or
no unit.

ATAGO RX-7000 i Specifications

General

Brand	ATAGO
Model	RX-7000 i
Category	Measuring Instruments
Language	English