A. Danger zone
Danger zone
No persons should be within the
danger zone. Fragments of
material which come loose while
operating the hydraulic
attachment may be flung away
and can cause serious injury if
people are hit by them. Small
objects falling from a great height
can also cause serious damage.
Applications
The transverse drum cutter is suitable for use in
trenching and tunnelling, for demolition and
renovation works, quarrying and in special
underground engineering.
Working area and hazardous
area
A. Working area for operating personnel
B. Hazardous area when working with the
transverse drum cutter
•
The working area for the operating personnel is
in the cabin of the carrier.
•
The hazardous area is in the direct vicinity of
the transverse drum cutter.
•
Whilst operating the transverse drum cutter, the
minimum distance around the carrier is 15
metres.
•
When cutting reinforced concrete, the minimum
distance around the carrier is 50 metres.
DC 200, 400, 600, 1000, 1200, 2000, 2100, 2900 Safety and operating instructions
© Construction Tools GmbH | 3390 5192 01 | 2016-12-01
Original instructions
19
To Next Page
Loading...