Prohibited operation
◆
Do not activate the transverse drum cutter with
the carrier in driving operation.
Cylinder end positions
◆
Reposition the carrier to avoid working with the
cylinder in its end positions.
Avoid operating the hydraulic attachment when
the carrier stick and bucket cylinder are in one
of their end positions. These end positions have
damping facilities; the hydraulic cylinder may be
damaged by prolonged use while in its end
positions.
Moving the carrier
◆
Never relocate the carrier sideways by placing
the hydraulic attachment on the ground to lift
the carrier.
This would seriously damage the hydraulic
attachment.
Lifting/Transporting
◆
Never use the hydraulic attachment to lift or
transport loads.
The hydraulic attachment was not constructed
to lift or transport loads. This would damage the
hydraulic attachment.
DC 200, 400, 600, 1000, 1200, 2000, 2100, 2900 Safety and operating instructions
© Construction Tools GmbH | 3390 5192 01 | 2016-12-01
Original instructions
35
To Next Page
Loading...