EC Declaration of Conformity (EC Directive 2006/42/EC)
We, Construction Tools GmbH, hereby declare that the machines listed below conform to the provisions of
EC Directive 2006/42/EC (Machinery Directive), and the harmonised standards mentioned below.
Transverse drum cutter Part number
DC 200 3363 1196 33
Following harmonised standards were applied:
◆
EN ISO 12100
◆
EN 474-1
Technical Documentation authorised representative:
Stephan Schröer
Construction Tools GmbH
45143 Essen
Germany
General Manager:
Lothar Sprengnetter
Manufacturer:
Construction Tools GmbH
45143 Essen
Germany
Place and date:
Essen, 2016-07-01
Safety and operating instructions DC 200, 400, 600, 1000, 1200, 2000, 2100, 2900
76 © Construction Tools GmbH | 3390 5192 01 | 2016-12-01
Original instructions
To Next Page
Loading...