Pick boxes
The pick boxes are welded onto the cutter drums
for holding round attack picks. Some pick boxes
may have a wear sleeve, which can be exchanged.
Signs / labels
WARNING Missing warnings
The name plate and the labels on the hydraulic
attachment contain important information about the
hydraulic attachment and for personal safety. A
missing warning can lead to overlooking or
misinterpretation of possible risks and cause
personal hazards. The signs and labels must
always be clearly legible.
►
Immediately replace any defective name plates
and labels.
►
Use the spare parts list to order new name
plates and labels.
Name plate
A. Model
B. Year of construction of hydraulic attachment
C. Max. hydraulic pressure
D. Weight of hydraulic attachment
E. Serial number
F. Name and address of manufacturer
G. The warning symbol and the book symbol
indicate that the Safety and Operating
Instructions must be read prior to use of the
hydraulic tool and in particular the chapter on
Safety.
H. The CE symbol indicates that the hydraulic
attachment was produced in conformity with
CE. You can find further information about this
in the enclosed EC Declaration of Conformity.
Safety and operating instructions DC 200, 400, 600, 1000, 1200, 2000, 2100, 2900
18 © Construction Tools GmbH | 3390 5192 01 | 2016-12-01
Original instructions
To Next Page
Loading...