Atlas Copco DC 200

Technical specifications
Type DC 200 DC 400 DC 600 DC 1000
Carrier weight class
1 1 - 3 t
2,200 -
6,600 lbs
3 - 8 t
6,600 -
17,500 lbs
8 - 15 t
17,500 -
33,000 lbs
10 - 18 t
22,000 -
40,000 lbs
Service weight
2 200 kg
440 lbs
400 kg
880 lbs
600 kg
1,330 lbs
1000 kg
2,200 lbs
Weight without adapter
3 150 kg
331 lbs
310 kg
683 lbs
470 kg
1,036 lbs
820 kg
1,808 lbs
Dimensions
Total length
Total width of cutting head
Diameter of cutter drum
615 mm
24.21 in.
500 mm
19.69 in.
240 mm
9.45 in.
805 mm
31.69 in.
610 mm
24.02 in.
370 mm
14.57 in.
965 mm
37.99 in.
685 mm
26.97 in.
450 mm
17.72 in.
1,130 mm
44.49 in.
795 mm
31.30 in.
575 mm
22.64 in.
Nominal power 18 kW
24 hp
30 kW
40 hp
45 kW
60 hp
65 kW
87 hp
Oil flow rate (see chapter Appendix)
Operating pressure (see chapter Appendix)
Rotational speed 80 - 235 rpm 60 - 160 rpm 55 - 135 rpm 40 - 90 rpm
Pick speed 1.0 - 3.0 m/s
3.3 - 9.7 fps
1.0 - 2.7 m/s
3.4 - 8.8 fps
1.2 - 2.8 m/s
3.8 - 9.2 fps
1.2 - 2.7 m/s
4.1 - 9.0 fps
Number of picks 56 64 44 48
Pick shaft diameter 16 mm
0.63 in.
20 mm
0.79 in.
22 mm
0.87 in.
25 mm
0.98 in.
Maximum cutting force at 350 bar (5,075 psi) 11.8 kN
2,650 lbf
19.5 kN
4,383 lbf
26.0 kN
5,845 lbf
36.2 kN
8,140 lbf
Maximum torque at 350 bar (5,075 psi) 1.4 kNm
1,900 ft lbs
3.1 kNm
4,200 ft lbs
5.2 kNm
7,050 ft lbs
10.4 kNm
14,100 ft lbs
Maximum rock hardness 25 Mpa
3,625 psi
25 Mpa
3,625 psi
40 Mpa
5,800 psi
50 Mpa
7,250 psi
Gear oil volume 2.5 l
0.66 gal
5 l
1.32 gal
10 l
2.64 gal
15 l
3.96 gal
Oil volume hydraulic motor 0.5 l
0.13 gal
1 l
0.26 gal
1.5 l
0.40 gal
2 l
0.53 gal
Hydraulic connections (Transverse drum cutter)
Pressure / tank line
Leakage oil line
JIC 3/4"
JIC 1/2"
JIC 7/8"
JIC 3/4"
SAE 1/2"
6000 psi
JIC 3/4"
SAE 1/2"
6000 psi
JIC 3/4"
Hose lines (inside diameter)
Pressure / tank line
Leakage oil line
10 mm
(0.39 in.)
10 mm
(0.39 in.)
12 mm
(0.47 in.)
12 mm
(0.47 in.)
12 mm
(0.47 in.)
12 mm
(0.47 in.)
12 mm
(0.47 in.)
12 mm
(0.47 in.)
Hole pattern SB 152 SB 302 MB 750 MB 750
Part number 3363 1196 33 3363 1155 29 3363 1155 30 3363 1155 31
1
Weight applies to standard carriers only.
Any variations must be agreed with Atlas Copco and / or the carrier manufacturer.
2
transverse drum cutter including adapter plate of medium size
Please note that the working weight can be considerably higher, depending on the adapter plate.
3
transverse drum cutter including rotatable upper part. Accessory parts such as the adapter plate are not included.
Safety and operating instructions DC 200, 400, 600, 1000, 1200, 2000, 2100, 2900
64 © Construction Tools GmbH | 3390 5192 01 | 2016-12-01
Original instructions