Overview
Equipment description
The illustration gives an overview of the main parts
and components of the hydraulic attachment.
Actual details may differ.
A. Gear housing
B. Round attack pick
C. Pick box
D. Cutter drum
E. Transport lug
F. Rotatable upper part
Function
The operation of a transverse drum cutter is
described in a simplified version below:
The transverse drum cutter is an attachment for
hydraulic carriers. The cutter drums are powered
by the hydraulic motor and the gear of the
transverse drum cutter. The round attack picks are
attached to the cutter drums at a defined angle. A
rotating motion of the cutter drums facilitates the
cutting process and thus reduces the size of the
rock.
Modules
Cutter drums
The transverse drum cutter is equipped with one
left and one right cutter drum. These cutter drums
are fastened by means of screws and special
clamping sleeves directly to the drive shafts. A
certain number of pick boxes are attached to the
surface of the cutter drums. These hold the round
attack picks in position.
The cutter drums can be designed with charging
spirals (see arrow).
Safety and operating instructions DC 200, 400, 600, 1000, 1200, 2000, 2100, 2900
16 © Construction Tools GmbH | 3390 5192 01 | 2016-12-01
Original instructions
To Next Page
Loading...