We, Construction Tools GmbH, hereby declare that the machines listed below conform to the provisions of
EC Directive 2006/42/EC (Machinery Directive), and the harmonised standards mentioned below.
Transverse drum cutter Part number
DC 400 3363 1155 29
DC 600 3363 1155 30
DC 1000 3363 1155 31
DC 2000 3363 1155 33
DC 2100 3363 1155 34
DC 2900 3363 1155 35
Following harmonised standards were applied:
◆
EN ISO 12100
◆
EN 474-1
Technical Documentation authorised representative:
Stephan Schröer
Construction Tools GmbH
45143 Essen
Germany
General Manager:
Lothar Sprengnetter
Manufacturer:
Construction Tools GmbH
45143 Essen
Germany
Place and date:
Essen, 2014-04-29
Safety and operating instructions DC 200, 400, 600, 1000, 1200, 2000, 2100, 2900
78 © Construction Tools GmbH | 3390 5192 01 | 2016-12-01
Original instructions
To Next Page
Loading...