To Next PageTo Next Page
Need help?Do you have a question about the Audio Technica 3000 Series and is the answer not in the manual?
General| Brand | Audio Technica |
|---|---|
| Model | 3000 Series |
| Category | Microphone system |
| Language | English |
Essential safety guidelines to prevent fire, shock, and damage to the apparatus.
Instructions for safe battery insertion, use, and disposal to prevent hazards.
Best practices for operating multiple wireless units simultaneously to avoid interference.
Information on preventing permanent hearing damage from excessive sound levels.
Identification and function of the front panel controls and indicators on the transmitter.
Identification and function of the rear panel connectors and ports on the transmitter.
Identification and function of the receiver's parts, including antenna, buttons, and jacks.
Identification of the parts of the ATH-E40 in-ear headphones.
Diagram illustrating a standard connection setup for the wireless system.
Example of using loop out to mix and monitor individual sounds with the band mix.
Example of using loop out to send audio to recorders or speakers.
Step-by-step guide for inserting batteries into the ATW-R3250 receiver.
Explanation of the indicators and information displayed on the ATW-T3205 transmitter screen.
Guide to reading the main screen display of the ATW-R3250 receiver.
Step-by-step instructions for setting up and operating the wireless system.
Steps to perform a group scan to find available channels within a specific group.
Steps to perform a full scan to find all available frequencies across all bands.
Step-by-step guide for synchronizing transmitter and receiver settings via IR SYNC.
How to save and switch between multiple frequencies as presets for monitoring.
Manual and group/channel methods for setting the transmitter's operating frequency.
Manual and group/channel methods for setting the receiver's operating frequency.
How to scan for available frequencies using the receiver's RF scan function.
Initiating and using the cue mode for managing multiple presets.
Troubleshooting steps for power, no voice, distorted sound, and unwanted noise on the transmitter.
Troubleshooting steps for power, voice, sound distortion, noise, and low battery on the receiver.
