430HD and 440HD IP Phone
User's Manual 102 Document #: LTRT-11938
7.1.6 Manually Pairing the BToE PC/Laptop Application with the IP Phone
This section shows how to manually pair AudioCodes' BToE PC/laptop application with the IP
phone using a pair code. Even though automatic pairing gives users greater freedom, manual
pairing is still an option. Manually pair like this:
1. Generate a pair code (see Section 7.1.6.1)
2. Connect the IP phone and BToE PC/laptop application using the pair code (see
Section 7.1.6.2)
Note:
• If the IP changes, you will need to generate a pair code again.
• If you know the last pair code, you don't need to generate a new one.
If you don't know it, continue below.
7.1.6.1 Manually Generating a Pair Code
This section shows how to generate a pair code.
To generate a pair code:
1. Press the MENU key.
2. Press the BToE softkey; the BToE pair code is displayed:
This is the pair code that will be used by the BToE PC/laptop application. Make a note of it for
reference when connecting the IP phone with the BToE PC/laptop application.
7.1.6.2 Manually Connecting the IP Phone with the BToE PC/Laptop Application
This section shows how to connect the IP phone with the BToE PC/laptop application.
To connect the two:
1. Open the AudioCodes BToE Connect screen: Click the BToE client icon placed on your
taskbar after installation; the following popup menu opens.
To Next Page
Loading...
