AudioCodes 430HD - Figure 3-4: Entering a Symbol (E.g., a Dot); Figure 3-5: Reverting to Letters (E.g., Abc)

User's Manual Contents
Version 3.0 23 430HD and 440HD IP Phone
 To enter a symbol (e.g., dot or @ or hyphen):
1. Press the A/a/1 softkey and navigate to abc (mandatory).
2. Press the 1 key on the keypad; a period / full stop is entered. Immediately press the 1 key
again; a backslash is entered. Pressing successively produces the following symbols:
Symbol Explanation Symbol Explanation
. Dot * Star sign
\ Backslash = Equal sign
@ At | Separator
; Semi-colon ( Open parenthesis
: Colon ) Close parenthesis
# Pound { Open parenthesis
$ Dollar } Close parenthesis
% Percentage [ Open square parenthesis
^ Caret ] Close square parenthesis
& Ampersand " Double quotation marks
! Exclamation mark ' Single quotation mark
? Question mark > Greater than
+ Plus < Less than
- Hyphen , Comma
_ Underscore / Forward slash
~ Approximates
Note that the asterisk (*) symbol is entered directly using the star key.
Figure 3-4: Entering a Symbol (e.g., a dot)
 To revert to letters (e.g., abc):

Make sure the phone is in abc mode and successively press the PQRS key three times to
produce r (for example):
Figure 3-5: Reverting to Letters (e.g., abc)