430HD and 440HD IP Phone
User's Manual 54 Document #: LTRT-11938
5.16 Defining Function Keys as Speed Dials
This section shows how to set up placing a call to a contact by pressing a Function Key defined
as a Speed Dial. You can define each of the 12 Function Keys on the phone's BLF sidecar as a
Speed Dial. Speed Dials for 12 contacts can therefore be defined. An additional five can be
defined using the Programmable Keys – see Section 5.20 on page 63).
Note: These are your own private Speed Dials. They are preserved even if you sign out of
the phone, sign in with another user, sign out as that user, and then sign in again as your own
user. The Speed Dials are preserved irrespective of whether configured on the BLF sidecar
or on the Programmable Keys adjacent to the LCD.
To define a Function Key as a Speed Dial:
1. Access the Function Keys screen (MENU key > Keys Configuration > Function Keys):
2. Navigate to and select an empty (undefined) Function Key; the selected Function Key is
displayed (#2, in this example):
Note:
• Function Key #1 is the topmost of the 12. Function Key #2 is second from the top.
Function Key #12 is the lowermost.
• You can also access a Function Key # screen by long-pressing one of the twelve
Function Keys.
3. In the ‘Number’ field, enter the contact's phone number, as shown below.
Navigate down to the 'Key Label' field and enter the contact's name to be displayed.
-OR-
To Next Page
Loading...
