User's Manual Contents
Version 3.0 59 430HD and 440HD IP Phone
5.18 Defining Programmable Keys as Speed Dials
Three Programmable Keys are located on either side of the LCD, making six in total.
Note: The upper left key is the preprogrammed line. It cannot be defined as a Speed Dial.
You can define the other five keys as Speed Dials just as you defined the 12 Function Keys as
SDs as shown in Section 5.16. You can therefore define a total of 17 SDs on a phone.
To define a Programmable Key as a Speed Dial:
1. Long-press a Programmable Key (that hasn't been defined) or press MENU > Keys
Configuration > Programmable Keys and select an 'Empty'; this screen is displayed:
2. Press the navigation control’s left/right rim to navigate to and select Speed Dial or Speed
Dial+BLF:
3. Press the Select softkey; this screen opens:
4. Define the 'Number' and 'Key Label' field – or navigate down to select the Select from
Directory option - as you did when defining a Function Key as Speed Dial (see Section 5.16
on page 54) and press the Save softkey; the LCD reverts to idle mode displaying the Speed
Key icon next to the name of the contact you defined ('Raoul', in this example):
5. To quickly place a call, press the key on the phone opposite 'Raoul'; the number is dialed.
To Next Page
Loading...
