430HD and 440HD IP Phone
User's Manual 44 Document #: LTRT-11938
5.11 Defining an Outbound Proxy
Skype for Business Server Multitenant Hosting Pack is a Microsoft® Unified Communications
(UC) hosting solution for telecommunications and hosting providers. The solution enables
Microsoft hosting partners to deploy a single instance of the Skype for Business Server software
to securely and economically host multiple tenants with a rich, fully integrated UC solution.
To connect AudioCodes' Skype for Business-compatible phone to a hosted Lync environment
(LHP), a dedicated 'Out0062ound Proxy' parameter is available which is used to configure the
hosted service provider's domain name (FQDN).
Note: In hosted environments, it's common practice that this hosted domain name is different
to the enterprise's domain name. Refer also to 400HD Series IP Phones for Skype for
Business Hosting Partner (LHPv2) Environment Configuration Note.
To configure a phone for an LHP environment, configure the address of the Outbound Proxy as
the hosted service provider's domain name (FQDN).
To configure the address of the Outbound Proxy:
1. Open the Outbound Proxy screen (MENU key > Settings > Outbound Proxy).
2. Press the right rim of the navigation control to set the 'Use Hosted Proxy' field to Enabled.
3. In the 'Proxy Address' field enter the hosted service provider's domain name (FQDN).
4. Navigate down to the 'Port' field, configure it (default = 0), and then press the Save softkey.
To Next Page
Loading...
