AudioCodes Mediant 2000 System User Manual

SIP User's Manual 284 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-2: System Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
VpFileURL
Specifies the name of the Voice Prompts file and the location of the
server (IP address or FQDN) from which it is loaded.\
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
CasFileURL
Specifies the name of the CAS file and the location of the server (IP
address or FQDN) from which it is loaded.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
TLSRootFileUrl
Specifies the name of the TLS trusted root certificate file and the location
URL from where it's downloaded.
TLSCertFileUrl
Specifies the name of the TLS certificate file and the location URL from
where it's downloaded.
UserInfoFileURL
Specifies the name of the User Information file and the location of the
server (IP address or FQDN) from which it is loaded.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
AutoUpdateCmpFile
Enables / disables the Automatic Update mechanism for the cmp file.
 [0] = The Automatic Update mechanism doesn't apply to the cmp file
(default).
 [1] = The Automatic Update mechanism includes the cmp file.
AutoUpdateFrequency
Determines the number of minutes the gateway waits between automatic
updates. The default value is 0 (the update at fixed intervals mechanism
is disabled).
AutoUpdatePredefinedTi
me
Schedules an automatic update to a predefined time of the day.
The range is 'HH:MM' (24-hour format).
For example: 20:18
Note: The actual update time is randomized by five minutes to reduce
the load on the Web servers.
ResetNow
This parameter is now obsolete.
BootP and TFTP Parameters
The BootP parameters are special 'Hidden' parameters. Once defined and saved in the flash
memory, they are used even if they don't appear in the ini file.
BootPRetries
Note: This parameter only takes effect from the next reset of the
gateway.
This parameter is used to:

AudioCodes Mediant 2000 System Specifications

General

Brand	AudioCodes
Model	Mediant 2000 System
Category	VoIP
Language	English