To Next Page

To Previous Page

SIP User's Manual 288 Document #: LTRT-68806

Mediant 2000 & TP-1610 & TP-260/UNI

Table 6-3: Web and Telnet Parameters

ini File Field Name

Web Parameter Name

Valid Range and Description

WelcomeMessage

Configures the Welcome message that appears after a Embedded Web

Server login.

The format of this ini file parameter table is:

[WelcomeMessage ]

FORMAT WelcomeMessage_Index = WelcomeMessage_Text

WelcomeMessage 1 = "..." ;

WelcomeMessage 2 = "..." ;

WelcomeMessage 3 = "..." ;

[\WelcomeMessage]

For Example:

[WelcomeMessage ]

FORMAT WelcomeMessage_Index = WelcomeMessage_Text

WelcomeMessage 1 = "**********************************" ;

WelcomeMessage 2 = "********* This is a Welcome message ***" ;

WelcomeMessage 3 = "**********************************" ;

[\WelcomeMessage]

Notes:

 Each index represents a line of text in the Welcome message box. Up

to 20 indexes can be defined.

 If this parameter is not configured, no Welcome message box is

displayed.

DisableWebConfig

 [0] = Enable changing parameters from Embedded Web Server

(default).

 [1] = Operate Embedded Web Server in 'read only' mode.

HTTPport

HTTP port used for Web management (default is 80).

Telnet Parameters

TelnetServerEnable