Version 5.2 289 September 2007
SIP User's Manual 6. ini File Configuration
Table 6-3: Web and Telnet Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
Customizing the Web Appearance Parameters
For detailed information on customizing the Embedded Web Server interface, refer to 'Customizing
the Web Interface' on page 65.
UseProductName
Determines whether the UserProductName text string is displayed
instead of the default product name.
 [0] = Disabled (default).
 [1] = Enables the display of the user-defined UserProductName text
string (in the Embedded Web Server interface and in the extracted ini
file).
If enabled, the UserProductName text string is displayed instead of the
default product name.
UserProductName
Text string that replaces the default product name that appears in the
Embedded Web Server (upper right-hand corner) and the extracted ini
file.
The default is 'Mediant 2000, TP-1610, or TP-260'.
The string can be up to 29 characters.
UseWebLogo
 [0] = Logo image is used (default).
 [1] = Text string is used instead of a logo image.
If enabled, AudioCodes' default logo (or any other logo defined by the
LogoFileName parameter) is replaced with a text string defined by the
WebLogoText parameter.
WebLogoText
Text string that replaces the logo image. The string can be up to 15
characters.
LogoWidth
Width (in pixels) of the logo image.
Note: The optimal setting depends on the resolution settings.
The default value is 441, which is the width of AudioCodes' displayed
logo.
LogoFileName
Name of the image file (of type GIF, JPEG, or JPG) containing the user's
logo.
File name can be up to 47 characters.
The logo file name can be used to replace AudioCodes' default Web
logo with a user defined logo.
BkgImageFileName
Name of the file containing the user's background image (of file type
GIF, JPEG, or JPG).
File name can be up to 47 characters.
The background file can be used to replace AudioCodes' default
background image with a user defined background.