SIP User's Manual 304 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-7: SIP Configuration Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
 Both GSM-FR and MS-GSM coders use Payload Type = 3. Using
SDP, it isn’t possible to differentiate between the two. Therefore, it is
recommended not to select both coders simultaneously.
 CoderName can appear up to 25 times (five coders in five coder
groups).
IPProfile
Configures the IP profiles table (for Embedded Web Server, refer to 'IP
Profile Settings' on page 136).
[IPProfile]
FORMAT IPProfile_Index = IPProfile_ProfileName,
IPProfile_IpPreference, IPProfile_CodersGroupID,
IPProfile_IsFaxUsed*, IPProfile_JitterBufMinDelay*,
IPProfile_JitterBufOptFactor*, IPProfile_IPDiffServ*,
IPProfile_SigIPDiffServ*, N/A, IPProfile_RTPRedundancyDepth,
IPProfile_RemoteBaseUDPPort, IPProfile_CNGmode,
IPProfile_VxxTransportType, IPProfile_NSEMode, N/A,
IPProfile_PlayRBTone2IP, IPProfile_EnableEarlyMedia*,
IPProfile_ProgressIndicator2IP*, IPProfile_ECE*;
[\IPProfile]
* = Indicates common parameters used in both IP and Tel profiles.
IplPreference = determines the priority of the Profile (1 to 20, where 20
is the highest preference). If both IP and Tel profiles apply to the same
call, the coders and other common parameters (indicated with an
asterisk) of the preferred Profile are applied to that call. If the Tel and IP
profiles are identical, the Tel Profile parameters are applied.
For example:
[IPProfile]
IPProfile_1 = name1,2,1,0,10,13,15,44,1,1,6000,0,2,0,0,0,1,0,1;
IPProfile_2 =
name2,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$;
[\IPProfile]
Notes:
 For a description of using ini file parameter tables, refer to 'Structure
of ini File Parameter Tables' on page 269.
 Two adjacent dollar signs ('$$') indicate that the parameter's default
value is used.
 IPProfile can be used in the Tel to IP Routing and IP to Trunk Group
Routing tables (Prefix and PSTNPrefix parameters).
 The 'Profile Name' assigned to a Profile index, must enable users to
identify it intuitively and easily.
 This parameter can appear up to 9 times (i.e., index = 1 to 9).
To Next Page
Loading...
Need help?
General