SIP User's Manual 326 Document #: LTRT-68806
Mediant 2000 & TP-1610 & TP-260/UNI
Table 6-12: Number Manipulation and Routing Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
Where,
 DestinationPrefix = Destination number prefix
 SourcePrefix = Source number prefix
 SourceAddress = Source IP address (obtained from the Request-
URI in the INVITE message)
 NumberType = Q.931 Number Type (TON)
 NumberPlan = Q.931 Number Plan (NPI)
 RemoveFromLeft = Number of stripped digits from the left
 RemoveFromRight = Number of stripped digits from the right
 LeaveFromRight = Number of remaining digits from the right
 Prefix2Add = String to add as prefix
 Suffix2Add = String to add as suffix
 IsPresentationRestricted = Calling number presentation (0 to allow
presentation; 1 to restrict presentation)
For example:
[SourceNumberMapIp2Tel]
SourceNumberMapIp2Tel 0 =
22,03,$$,$$,$$,$$,2,667,$$,$$;SourceNumberMapIp2Tel 1 =
034,01,1.1.1.1,$$,0,2,$$,$$,972,$$,10;
[\SourceNumberMapIp2Tel]
Notes:
 For a description on ini file parameter tables, refer to 'Structure of ini
File Parameter Tables' on page 269.
 RemoveFromLeft, RemoveFromRight, Prefix2Add, Suffix2Add,
LeaveFromRight, NumberType, and NumberPlan are applied if the
called and calling numbers match the DestinationPrefix,
SourcePrefix, and SourceAddress conditions.
 The manipulation rules are executed in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight, Prefix2Add,
and Suffix2Add.
 Parameters can be skipped by using two dollar signs ('$$').
 The Source IP address can include the 'x' wildcard to represent
single digits. For example: 10.8.8.xx represents all addresses
between 10.8.8.10 and 10.8.8.99.
 The Source IP address can include the asterisk ('*') wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all the addresses between 10.8.8.0 and 10.8.8.255.
To Next Page
Loading...
Need help?
General