Version 5.2 327 September 2007
SIP User's Manual 6. ini File Configuration
Table 6-12: Number Manipulation and Routing Parameters
ini File Field Name
Web Parameter Name
Valid Range and Description
For ETSI ISDN variant, the following Number Plan and Type combinations (Plan/Type) are supported
in the Destination and Source Manipulation tables:
 0,0 = Unknown, Unknown
 9,0 = Private, Unknown
 9,1 = Private, Level 2 Regional
 9,2 = Private, Level 1 Regional
 9,3 = Private, PISN Specific
 9,4 = Private, Level 0 Regional (local)
 1,0 = Public(ISDN/E.164), Unknown
 1,1 = Public(ISDN/E.164), International
 1,2 = Public(ISDN/E.164), National
 1,3 = Public(ISDN/E.164), Network Specific
 1,4 = Public(ISDN/E.164), Subscriber
 1,6 = Public(ISDN/E.164), Abbreviated
For NI-2 and DMS-100 ISDN variants the valid combinations of TON and NPI for calling and called
numbers are (Plan/Type):
 0/0 - Unknown/Unknown
 1/1 - International number in ISDN/Telephony numbering plan
 1/2 - National number in ISDN/Telephony numbering plan
 1/4 - Subscriber (local) number in ISDN/Telephony numbering plan
 9/4 - Subscriber (local) number in Private numbering plan
SecureCallsFromIP
For a description of this parameter, refer to 'General Parameters' on
page 103.
To Next Page
Loading...
Need help?
General