AUMA ACVExC 01.2 Series User Manual

S
Safety instructions 8
Safety instructions/warnings 8
Selection overview for output
contacts and indication lights
129
Selector switch functions 80
Self-retaining 13
Self-retaining local 32
Self-retaining Remote 33
Serial number 10, 11
Service 35
Service functions 100
Setpoint - indication on dis-
play
22
Setpoint source - process
controller
60
Set speed range 47
Signal loss 74
Signal output units (AIN) 44
Signals 27
Signals (analogue) 28
Signals - configurable 27
Simulation 108
Size 10
Sollwertansteuerung (Fern
SOLL)
56
Source (PVST) 86
Speed: set 46
Speed (failure behaviour) 75
Speed functions 45
Speed reduction (before end
positions)
47
Speed reduction (positioner) 56
Speed setpoint 45
Speed source 45
Speed source - process con-
troller
63
Split Range operation 57
Standards 8
Start of stepping mode 65
Status menu 15
Status signals 27
Status signals - configurable 27
Stepping mode 63
Stepping mode: by-pass 79
Stop step 65
Support App 11, 11
Switching off for reaction time
error
94
Synchronous link 69
T
Target configuration 102
Temperature (motor) 116
Temperature indication 120
Temperature monitoring 96
Temperature-time character-
istic
115
Temperature unit 42
Thermal monitoring 91
Time 41
Torque (histogram) 117
Torque by-pass 89, 89
Torque - indication on display 21
Torque limitation 90
Torque monitoring 89
Torque seating 36
Torque switching 37, 38
Torque switching: by-pass 78
Torque-travel characteristic 112
Torque unit 42
Torque warning 89
Two-wire control 51
Type (device type) 10
Type designation 10, 10
Type of seating for end posi-
tions
36
U
User level 16
V
Valve position - indication on
display
20
Verification of sub-assemblies 97
Vibration 120
Vibration monitoring 95
W
Warnings - indication on dis-
play
22
Wiring diagram 10
Working value units (AIN) 43
Y
Year of production 11
135
Actuator controls
ACV 01.2/ACVExC 01.2 Index

AUMA ACVExC 01.2 Series Specifications

General

Brand	AUMA
Model	ACVExC 01.2 Series
Category	Controller
Language	English