AUMA ACVExC 01.2 Series User Manual

7.4. Date and time
After commissioning, we recommend checking and setting date and time. Date and
time are required for the event report function.
In case of a mains failure, date and time are stored.This data will only have to be
checked after a longer downtime.
Display... M0009
Date and time M0221
Information
●
The date format, e.g. day/month/year, can be changed via the parameter Date
format M0310.
●
The time format, e.g. 12/24h can be changed via the parameter Time
format M0050.
7.5. Display formats
The indications on the display can be represented in different formats: Country-specific
spellings, for example, can be accounted for.
7.5.1. Date format
The data can be represented in day/month/year or in year/month/day.
Display... M0009
Date format M0310
Default value: DD.MM.YYYY
Setting values:
MM/DD/YYYY
Indication in: Month/day/year, example: 01/21/2009
DD.MM.YYYY
Indication in: Day/month/year, example: 21.01.2009
YYYY-MM-DD
Indication in:Year/month/day, example: 2009–01–21
7.5.2. Time format
The time can be indicated in 12 or 24 hour format.
Display... M0009
Time format M0050
Default value: 24h
Setting values:
12h
Indication of hour/minute/second in 12-hour format, example: 02:25:09 PM
24h
Indication of hour/minute/second in 24-hour format, example: 14:25:09
7.5.3. Number format
The number format determines the sign for indicating the decimal places. Either a
decimal point or a decimal comma can be used to separate integral numbers and
decimal places.
Display... M0009
Number format M0231
Default values:
●
For English as display language = xx.x
●
For all other display languages = xx,x
Setting values:
xx.x
Indication of the decimal places using a decimal point, example: 20.0 mA
xx,x
Indication of the decimal places using a decimal comma, example: 20,0 mA
41
Actuator controls
ACV 01.2/ACVExC 01.2 Basic settings for commissioning

AUMA ACVExC 01.2 Series Specifications

General

Brand	AUMA
Model	ACVExC 01.2 Series
Category	Controller
Language	English