DL205 PLC USER MANUAL
Please include the Manual Number and the Manual Issue, both shown below,
when communicating with Technical Support regarding this publication.
Manual Number: D2-USER-M
Issue: 4th Edition, Rev. B
Issue Date: 2/13
Publication History
Issue Date Description of Changes
1st Edition 1/94 original edition
Rev. A 9/95 minor corrections
2nd Edition 6/97 added DL250, downsized manual
Rev. A 5/98 minor corrections
Rev. B 7/99 added torque specs for base and I/O
Rev. C 11/99 minor corrections
Rev. D 3/00 added new PID features, minor corrections
Rev. E 11/00 added CE information, minor corrections
Rev. F 11/01
added surge protection info, corrected RLL and DRUM instructions,
minor corrections
3rd Edition 6/02
added DL250–1 and DL260 CPUs, local expansion I/O, ASCII and
MODBUS instructions, split manual into two volumes
Rev A 8/03 extensive corrections and additions
4th Edition 11/08
changed publishing software resulting in change of appearance, addition of IBox
instructions, changes to PID chapter, added info for ERM and EBC modules, other
changes as necessary
Rev A 4/10 extensive corrections and additions
Rev B 2/13
corrected number of memory registers needed in the print message instruction.
added new transient suppression for inductive loads to Chapter 2.
added H2-CTRIO2 and H2-ERM100 references.
To Next Page
Loading...
