Example
The following figure provides a sample of the show poe-main-status command.
PoE Main Status - Stand-alone
--------------------------------------------------
Power Mode : Low Power Budget
Available DTE Power : 60 Watts
DTE Power Status : Normal
DTE Power Consumption : 0 Watts
DTE Power Usage Threshold : 80 %
PD Detect Type : 802.3at and Legacy
Power Source Present : AC Only
AC Power Status : Present
DC Power Status : Not Present
Managing Power Over Ethernet (PoE)
110 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com