Name Description
LastSyncSourceInetAddress Indicates the IP address of the SNTP server with
which this device last synchronized. This is a read-
only value.
NextSyncTime Indicates the UTC at which the next synchronization
is scheduled. This is a read-only value.
PrimaryServerSyncFailures Indicates the number of times the switch failed to
synchronize with the primary server address.
However, synchronization with the secondary server
address can still occur. This is a read-only value.
SecondaryServerSyncFailures Indicates the number of times the switch failed to
synchronize with the secondary server address. This
is a read-only value.
CurrentTime Indicates the current switch UTC. This is a read-only
value.
Configuring local time zone using EDM
Use this procedure to configure the local time zone for the switch geographical location.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click SNTP/Clock.
3. In the work area, click the Time Zone tab.
4. In the TimeZone box, select the time zone offset.
5. In the TimeZoneAcronym dialog box, type a time zone acronym.
6. On the toolbar, click Apply.
Time Zone tab field descriptions
The following table describes the fields on the Time Zone tab.
Name
Description
TimeZone Specifies the time zone of the switch, measured as
an offset in 15–minute increments from Greenwich
Mean Time (GMT).
TimeZoneAcronym Specifies the time zone acronym.
Configuring daylight savings time using EDM
Use this procedure to configure the start and end of the daylight savings time period.
Configuring the switch using EDM
July 2015 Getting Started with Avaya ERS 3500 Series 133
Comments on this document? infodev@avaya.com
To Next Page
Loading...
