Name Description
IP Route to Gateway Modem-Router Specifies the IP Route to gateway modem and
router. By default, the IP address is 192.168.44.2
IP Office Call-Server Specifies the IP Office call server IP address. By
default, the call server IP address is 192.168.42.1
IP Office File-Server Specifies the IP Office file server IP address. By
default, the file server IP address is 192.168.42.1
Status Displays the status of the last action that occurred
since the switch last booted. Values include:
• other—no action occurred since the last boot.
• inProgress—the selected operation is in progress.
• passed—the selected operation succeeded.
• failed—the selected operation failed.
Viewing switch information using EDM
Use this procedure to display switch specific information such as the type of switch, hardware
version number, serial number, the number of base ports, and the total number of ports.
Procedure
1. From the Device Physical View, click a switch.
2. From the navigation tree, click Edit.
3. In the Edit tree, click Unit.
Unit field descriptions
The following table describes the fields on the Unit tab.
Name
Description
Type Specifies the type of switch.
Descr Description of switch.
Ver Specifies the hardware revision number of the
switch.
SerNum Specifies the serial number of the switch.
BaseNumPorts Specifies the base number of ports.
TotalNumPorts Specifies the total number of ports.
Configuring the switch using EDM
July 2015 Getting Started with Avaya ERS 3500 Series 121
Comments on this document? infodev@avaya.com
To Next Page
Loading...
