Name Description
TimeZoneAcronym Specifies a time zone acronym.
StartYear Specifies the year when you want to start the
daylight savings time.
StartMonth Specifies the month of each year when you want to
start the daylight savings time.
StartDay Specifies the day of the particular month when you
want to start the daylight savings time.
StartHour Specifies the hour of the particular day when you
want to start the daylight saving time.
StartMinutes Specifies the minutes of the particular hour when you
want to start the daylight savings time.
EndYear Specifies the year when you want to end the daylight
savings time.
EndMonth Specifies the month of each year when you want to
end daylight savings time.
EndDay Specifies the day of the particular month when you
want to end daylight savings time.
EndHour Specifies the hour of the particular day when you
want to end daylight savings time.
EndMinutes Specifies the minute of the particular hour when you
want to end daylight savings time.
Enabled Enables or disables daylight savings time.
Important:
Before you enable daylight savings time,
configure the feature attributes.
Configuring recurring daylight saving time using EDM
Use this procedure to configure the daylight saving time start and end times for a single occurrence
or to recur yearly.
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click SNTP/Clock.
3. In the work area, click the SummerTimeRecurring tab.
4. Perform one of the following:
• Select the Recurring check box to enable recurring daylight savings time for the switch
OR
• Clear the Recurring check box to disable recurring daylight savings time for the switch.
Configuring the switch using EDM
July 2015 Getting Started with Avaya ERS 3500 Series 135
Comments on this document? infodev@avaya.com
To Next Page
Loading...
