3. In the work area, click the ports tab.
4. Select a Port.
5. In the Port row, double-click the cell in the EnergySaverEnabled column.
6. Select true from the list.
7. Repeat steps 4, 5 and 6 to enable AES for additional ports as required.
8. Click Apply.
9. On the toolbar, you can click Refresh to update the work area data display.
Ports field descriptions
Use the data in the following table to use the Ports tab.
Name Description
Port Specifies the port number.
EnergySaverEnabled Indicates whether the Avaya Energy Saver feature is
enabled for the port.
Disabling AES on individual ports using EDM
Use the following procedure to turn off AES for individual ports on a switch or stack.
Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the ports tab.
4. Select a Port.
5. In the Port row, double-click the cell in the EnergySaverEnabled column.
6. Select false from the list.
7. Repeat steps 4, 5 and 6 to disable AES for additional ports as required.
8. Click Apply.
9. On the toolbar, you can click Refresh to update the work area data display.
Viewing AES information using EDM
Use the following procedure to display energy saving information for an individual switch or switches
in a stack.
Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
Configuring the switch using EDM
146 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
