Name Description
TftpServerInetAddress Specifies the IP address of the TFTP server on
which the new software images are stored for
download.
BinaryConfigFileName Specifies the binary configuration file currently
associated with the switch.
ImageFileName Specifies the name of the image file currently
associated with the switch. You can change this
value to the name of the software image to be
downloaded.
FwFileName(Diagnostics) Specifies the name of the diagnostic file currently
associated with the switch. You can change this field
to the name of the diagnostic software image to be
downloaded.
Action Specifies the actions taken during this file system
operation. The available options are:
• other
• dnldConfig: downloads a configuration file to the
switch. The new configuration file is implemented
on the next switch boot cycle.
• upldConfig: uploads a configuration file to a
server from the switch. The configuration file
contains the current switch MIB object value.
• dnldImg: downloads a new software image to the
switch.
• dnldImgIfNewer: downloads a new software
image to the switch only if it is newer than the
image currently saved on FLASH.
• dnldImgNoReset: downloads a new software
image to the switch, but does not reset the switch
when the download is complete.
• dnldFw: downloads new firmware to the switch.
• dnldFwNoReset: downloads new firmware to the
switch, but does not reset the switch when the
download is complete.
Status
Displays the status of the last action that occurred
since the switch last booted. Values include:
• other: no action occurred since the last boot.
• inProgress: the selected operation is in progress.
• success: the selected operation succeeded.
• fail: the selected operation failed.
Configuring the switch using EDM
130 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
