Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Schedules tab.
4. Click Insert.
5. To choose a day for the AES schedule on time, select a radio button in theScheduleDay
section.
6. To choose an hour of the day for the AES schedule on time, type a value in the
ScheduleHour section.
7. To choose a portion of an hour for the AES schedule on time, type a value in the
ScheduleMinute section.
8. To configure the selected day, hour, and minutes as the AES schedule on time, select the
activate radio button in the ScheduleAction section. Activate is selected by default.
9. Click Insert.
Energy Saver Schedules field descriptions
Use the data in the following table to use the Energy Saver Schedules tab.
Name
Description
ScheduleDay Indicates the day on which this schedule entry takes
effect.
ScheduleHour Indicates the hour on which this schedule entry takes
effect.
ScheduleMinute Indicates the minute on which this schedule entry
takes effect.
ScheduleAction Activates or deactivates the energy savings.
Configuring the AES schedule off time using EDM
Use the following procedure to configure the end of a time interval for the switch to enter lower
power states. The time interval can span a complete week, a complete weekend, multiple days, or
be configured within an individual day.
Before you begin
• Disable AES globally.
Procedure
1. From the navigation tree, double-click Power Management.
2. In the Power Management tree, double-click Energy Saver.
3. In the work area, click the Energy Saver Schedules tab.
4. Click Insert.
Configuring the switch using EDM
144 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
