Figure 3: ERS 3549GTS and ERS 3549GTS-PWR+ rear ports
Figure 4: ERS 3550T and ERS 3550T-PWR+ rear ports
For more information on stacking, refer to the following:
• The correct Avaya SFP direct attach cable is required in order to enable and use stacking
mode. Stacking cables must be ordered separately.
• For information on how to configure stacking, refer to Installation Job Aid (English) for Avaya
Ethernet Routing Switch 3500 Series, NN47203-303.
• For stacking procedures using ACLI, refer to
Configuring the operational mode on rear ports on
page 79.
• For stacking procedures using EDM, refer to Rear ports mode configuration on page 137.
Getting started fundamentals
26 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
