solutions with IP Office supporting approximately 2 to 384 users on the switch platform, and more
when stacking is used.
You can execute the script with all the predefined default values and settings without the
requirement of user invention. Alternatively, by using the verbose mode of the script, you have the
opportunity to change the default values using prompted inputs. The script is available only for
privileged users with configuration rights. The script is meant to be executed on a switch with default
settings. If you execute the script on an already configured switch, you may encounter script failure
or an incomplete configuration.
Table 2: Default parameters for IPOffice script
Voice VLAN ID 42
Voice VLAN 42 gateway IP 192.168.42.254
Data VLAN ID 44
Data VLAN 44 gateway IP 192.168.44.254
Switch Management IP 192.168.44.254
Default route 0.0.0.0 next hop 192.168.44.2
IP Office Call server address 192.168.42.1
IP Office File server address 192.168.42.1
Switch port 1 (or 1/1) IP Office
Switch port 2 (or 1/2) WAN / ADSL Router
Switch port 3 (or 1/3) & above IP Phones, PCs, printers and other data devices
Following the port assignments, you can use the illustration below to connect your Avaya IP Office,
WAN Router, IP Phones and devices to the Avaya Ethernet Routing Switch.
Configuring the switch using ACLI
54 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com
To Next Page
Loading...
