Avaya 3500 series - Page 96

Variable definitions
The following table describes the parameters for the show auto-negotiation-
advertisements command.
Variable Value
port<portlist> Enter ports for which you want the current
autonegotiation advertisements displayed. If you
enter more than one port number, separate ports
with a comma (,).
Displaying the hardware advertisement capabilities for the switch
in ACLI
Use this command to display the hardware advertisement capabilities for the switch.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. To display the hardware advertisement capabilities for the switch, enter the following
command:
show auto-negotiation-capabilities [port <portlist>]
Example
switch>show auto-negotiation-capabilities port 1/20-26
Unit/Port Autonegotiation Capabilities
--------- -------------------------------------------------------------------
1/20 10Full 10Half 100Full 100Half
1/21 10Full 10Half 100Full 100Half
1/22 10Full 10Half 100Full 100Half
1/23 10Full 10Half 100Full 100Half
1/24 10Full 10Half 100Full 100Half
1/25 10Full 10Half 100Full 100Half 1000Full AsymmPause
1/26 10Full 10Half 100Full 100Half 1000Full AsymmPause
Variable definitions
The following table describes the parameters for the show auto-negotiation-capabilities
command.
Variable
Value
port<portlist> Enter ports for which you want the current
autonegotiation capabilities displayed. If you enter
more than one port number, separate ports with a
comma (,).
Managing Ethernet ports using ACLI
96 Getting Started with Avaya ERS 3500 Series July 2015
Comments on this document? infodev@avaya.com