EasyManua.ls Logo

Avaya S8500 - Converting the IP600 Control Chassis to a Port Network

Avaya S8500
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Converting a processor port network to a port network (IP600)
Migrating to the Avaya S8700 or S8710 Media Server 103
June 2004
NOTE:
If customers currently are using the Audix feature on the S8100, they need to purchase a
separate Audix system. The TN795 or TN2314 Processor circuit pack containing the
Audix feature is being replaced with a TN2312BP Internet Protocol Server Interface
(IPSI-2) circuit pack that does not have that feature. The existing processor circuit pack
must be returned to Avaya.
NOTE:
Customers also need to add an ED-1E568-70G1 DEFINITY Audix Slim board and a
TN2501AP Voice Announcement over LAN (VAL) circuit pack for announcements.
Converting the IP600 control chassis to a port
network
To convert the Avaya IP600 control chassis to a port network, you must
Replace the existing straight-wire WP cables, if present, with new twisted pair I/O cables.
Replace the processor circuit pack with a TN2312BP IP server interface (IPSI) circuit pack.
Connect a CAT5 straight-through cable from the IPSI to the media server through the customers
network.
NOTE:
If replacing a TN795 Processor circuit pack, you may not need the TN744D/E Call
Classifier-Detector circuit pack. The TN2312BP Internet Protocol Server Interface (IPSI-
2) circuit pack has call classifier functionality; however, increased voice and data traffic
may require the TN744D/E Call Classifier-Detector circuit pack.
NOTE:
If you have a TN799C or earlier C-LAN circuit pack, you must replace it with a TN799DP
C-LAN circuit pack.
NOTE:
The new license file should be installed on the media server before making the conversion.
848525887 IP Media Processor adapter 1/MedPro
1/C-LAN
NA CAT5 cables 1/MedPro
1/C-LAN
700234032
700207111
700181118
Migration kit (PEC code 63275):
– Upper circuit pack slot label
– Twisted pair I/O cables
1
10
106689516 TN771 Maintenance/Test circuit pack (optional) 1 or more
108772583 TN2501AP Voice Announcement over LAN circuit pack
(optional)
1
NA ED-1E568-70G1 (optional) 1
Table 12: Required Migration Hardware 2 of 2
Comcode Description Quantity

Table of Contents

Related product manuals