2Migrating from an S8500 Media Server to S8710 Media Server
On the active S8710 Media Server
Migrating to the Avaya S8700 or S8710 Media Server 133
June 2004
Resolve alarms
1 Under Alarms and Notification, click Current Alarms.
2 Select the server alarms to be cleared and click Clear.
3 Resolve new alarms since the migration using SAT commands and the Maintenance Commands
for Avaya Communication Manager 2.1, Media Gateways and Servers and Maintenance Alarms
for Avaya Communication Manager 2.1, Media Gateways and Servers books.
Back up files on the media server
1 Under Data Backup/Restore, click Backup Now.
2 Select the data sets and the backup method.
Select Save ACP translations prior to backup to save the translations to the hard drive before
saving it to the backup media or customer’s network.
3 Click Start Backup to begin the back up process.
Release alarm suppression (optional)
1 Repeat task Release alarm suppression (optional) on page 132 on the active media server and
return here.
Set the Product ID
1 Repeat task Set the Product ID on page 132 on the active media server. and return here
Log off all administration applications
When you have completed all the administration, log off all the applications used.
Disconnect from the media server
Disconnect the laptop from the media server.
Register the system
Follow the existing process and procedures to register the Avaya S8710 Media Server.
To Next Page
Loading...
