3 Migrating from an S8700 Media Server to an S8710 Media Server
On the S8700 Media Server
144 Migrating to the Avaya S8700 or S8710 Media Server
June 2004
2 Type command and press Enter to open a MS-DOS Command Line window.
3 Type arp -d 192.11.13.6 and press Enter to clear the Address Resolution Protocol (ARP) cache in
the laptop. This command responds with one of the following:
• The command line prompt when the cache has been cleared.
• The phrase: The specified entry was not found.
This is returned when the specified IP address does not currently appear in the ARP cache.
Connect to the active media server
1 Connect the laptop to the services port (2) on the back of the active media server using a
crossconnect CAT5 cable. See Figure 23, Services laptop computer connected directly to the
S8700 Media Server, on page 144.
Figure 23: Services laptop computer connected directly to the S8700 Media Server
Figure notes
1 Services laptop
2 Network Interface Card (NIC)
3 NIC adapter cable (if necessary)
4 Black CAT5 crossconnect cable
cadlsrvr KLC 030402
1
2
3
2
1
554433
22
DAI - 1
DUP
MEMORY
LINE
RECEIVE
TRANS
LINK
STAT
AVAYA
4
To Next Page
Loading...
