3Migrating from an S8700 Media Server to an S8710 Media Server
Pre-Migration Setup
Migrating to the Avaya S8700 or S8710 Media Server 141
June 2004
7 Log off all administration applications on page 161
8 Disconnect from the media server on page 161
On the active S8710 Media Server:
1 Access the active media server on page 161
2 Resolve alarms on page 162
3 Back up files on the media server on page 162
4 Release alarm suppression (optional) on page 162
5 Set the Product ID on page 162
6 Log off all administration applications on page 162
7 Disconnect from the media server on page 162
8 Register the system on page 162
On the active S8700 Media Server:
1 Access the media server on page 163
2 Shut down the media server on page 163
3 Disconnect the cables on page 163
Task list for R2.0 to R2.1
On the S8700 Media Servers:
1 Clear the ARP cache on the laptop on page 143
2 Connect to the active media server on page 144
3 Access the media server on page 145
4 Clear alarms on page 145
5 Start a SAT session on page 145
6 Check link status on page 145
7 Record all busyouts on page 146
8 Check clock synchronization on page 146
9 Disable scheduled maintenance on page 146
10 Busyout MMI circuit packs (duplicated control only) on page 146
11 Check for translation corruption on page 147
12 Access active S8700 Media Server on page 147
13 Check software release (pre-R2.0 only) on page 147
14 Back up the system files on page 147
15 Back up the security files on page 148
16 Record the Product ID on page 149
17 Access the standby S8700 Media Server on page 149
18 Shut down the standby S8700 Media Server on page 149
To Next Page
Loading...
