Avaya S8500 - Adding IPSI Translations to Communication Manager

Migrating translations
Migrating to the Avaya S8700 or S8710 Media Server 47
June 2004
Adding IPSI translations to Communication
Manager
1 Type change system-parameters ipserver-interface and press Enter
S8700 MC:
S8700 IP:
2 Verify that the Primary Control Subnet Address and Secondary Control Subnet Address (if
equipped) fields are correct.
The subnet addresses must match the most significant 3 octets (the first 3 groups of digits in the
subnet address) of the Server IP address filled in on the control network entry from the filled-out
Electronic Preinstallation Worksheet (EPW).
change system-parameters ipserver-interface Page 1 of 1
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
SERVER INFORMATION
IPSI Host Name Prefix: vodka
Primary Control Subnet Address: 198.152.254. 0 *
Secondary Control Subnet Address: 198.152.255. 0 *
OPTIONS
Switch Identifier: A
IPSI Control of Port Networks: disabled
change system-parameters ipserver-interface Page 1 of 1
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS
SERVER INFORMATION
IPSI Host Name Prefix:
Primary Control Subnet Address: 172. 22. 0. 0*
Secondary Control Subnet Address: . . .
OPTIONS
Switch Identifier: A
IPSI Control of Port Networks: disabled
NOTE: * indicates data changed on the server