Migrating translations
Migrating to the Avaya S8700 or S8710 Media Server 35
June 2004
Verifying license file
1 Under Security, click License File.
2 Verify that the MultiVantage License Mode: field shows Normal.
Transfering translations (Multi-Connect only)
There are two ways to transfer translations to the media server:
• From a magneto optical disk on page 35—if the existing system has an optical drive.
• From a PCMCIA flashcard on page 41—if the existing system has a tape (R) or flash (SI) drive.
This is a blowback provided by Avaya’s Software Translations Support (STS) group.
Once the translations are input and copied to the hard drive, you must administer the TN2312BP IP
Server Interface circuit packs.
From a magneto optical disk
The Magneto Optical Server Tool (MOST) is used to transfer translation files from a Magneto Optical
disk to an Avaya S8700 or S8710 Media Server. This tool is used only when migrating call processing
translations on a DEFINITY ECS R to an Avaya S8700 or S8710 Media Server in a Multi-Connect
configuration only.
The MOST tool is not shipped with every system but should be available locally.
To Next Page
Loading...
