Avaya S8500 - Connecting to the Standby Media Server; Disconnecting from the Active Media Server

Migrating translations
40 Migrating to the Avaya S8700 or S8710 Media Server
June 2004
Figure 2: Magneto optical drive connection to S8710 Media Server
S8700 or S8710
Disconnecting from the active media server
1 Unplug the laptop from the services port on the back of the active media server.
Connecting to the standby media server
S8700 only
1 Connect to the services port on the back of the standby media server.
Figure notes
1 Back of S8700 Media Server
2 Cable with USB connector
3 SCSI cable and connector
4 Bottom connector on Magneto Optical drive
5 Power Switch
6 Magneto Optical Drive
1234
ON ECE
2
3
4
5
6
7
0
1
+5VDC
OUT
IN
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
DAL1 DUP MEMORY
RECEIVE MODE
LINC SYNC
TRANS MODE
LINC ACTIVE
1
2
3
4
5
6
cadlopt2 KLC 040604