4Migrating a dedicated control network to a nondedicated control network
Migrating to the Avaya S8700 or S8710 Media Server 165
June 2004
4 Migrating a dedicated control
network to a
nondedicated control network
You can migrate a previously dedicated (private) control network to one that is nondedicated (through the
customer’s network). To do this, you must be on Release 2.0 or later of Communication Manager. You
also must have a filled-out Electronic Preinstallation Worksheet (EPW) provided by the project manager
or customer. The worksheet has the customer-provided IP addresses needed to reconfigure the media
server.
For the actual process of migrating from a nondedicated control network to a dedicated one, see the white
paper titled Implementation of Control Network on Customer LAN: S8700 Multi-Connect System.
To Next Page
Loading...
