EasyManua.ls Logo

Avaya S8500 - Converting the Control Cabinet to a Port Network

Avaya S8500
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Converting a processor port network to a port network (CMC)
Migrating to the Avaya S8700 or S8710 Media Server 99
June 2004
NOTE:
If customers are currently using the Audix feature on the S8100 Media Server, they need
to purchase a separate Audix system. The TN795 or TN2314 Processor circuit pack
containing the Audix feature is being replaced with a TN2312BP Internet Protocol Server
Interface (IPSI-2) circuit pack that does not have that feature. The existing processor
circuit pack must be returned to Avaya.
NOTE:
Customers also need to add an ED-1E568-70G1 DEFINITY Audix Slim board and a
TN2501AP Voice Announcement over LAN (VAL) circuit pack for announcements.
Converting the control cabinet to a port
network
To convert the control cabinet to a port network, you must
If CSI, remove the TN798 or TN2402 Processor circuit pack and replace the TN2182 Tone Clock
circuit pack with a TN2312BP Internet Protocol Server Interface (IPSI-2) circuit pack.
If S8100 Media Server, replace the TN795 or TN2314 Processor circuit pack with a TN2312BP
Internet Protocol Server Interface (IPSI-2) circuit pack.
Connect a CAT5 straight-through cable from the IPSI to the media server through the customers
network.
NOTE:
If replacing a TN795 Processor circuit pack, you may not need the TN744D/E Call
Classifier-Detector circuit pack. The TN2312BP Internet Protocol Server Interface (IPSI-
2) circuit pack has call classifier functionality; however, increased voice and data traffic
may require the TN744D/E Call Classifier-Detector circuit pack.
NOTE:
If you have a TN799C or earlier C-LAN circuit pack, you must replace it with a TN799DP
C-LAN circuit pack.
700060643 TN2302AP IP Media Processor circuit pack 1 or more
700055015 TN799DP C-LAN circuit pack (to replace TN799C) 1 or more
848525887 IP Media Processor adapter 1/MedPro
1/C-LAN
NA CAT5 cables 1/MedPro
1/C-LAN
106689516 TN771 Maintenance/Test circuit pack (optional) 1 or more
108772583 TN2501AP Voice Announcement over LAN circuit pack
(optional)
1
NA ED-1E568-70G1 (optional) 1
Table 11: Required Migration Hardware 2 of 2
Comcode Description Quantity

Table of Contents

Related product manuals