Converting a processor port network to a port network (CMC)
Migrating to the Avaya S8700 or S8710 Media Server 101
June 2004
Adding TN2302AP IP Media Processor
Installing TN771 Maintenance/Test
Install a TN771 Maintenance/Test circuit pack in slot 1. There must be one TN771 Maintenance/Test
circuit pack per location. Maintenance functions were present on the TN798 or TN2402 Processor circuit
pack and must be replaced by the TN771. This carrier does not have a TN775 Maintenance (EPN)
dedicated slot.
If the cabinet does not have a TN2302AP IP Media Processor (CSI did not require it), then you must
install one in slot 10. See the Adding New Hardware book, Install and Administer IP Connectivity
Hardware section.
Connecting to the media server
Connect one end of the GREEN CAT5 straight-through cable to the Ethernet switch on the customer’s
network and the other to the IPSI adapter on the back of the media gateway.
To Next Page
Loading...
