Migrating from a DEFINITY ECS R or SI
Migrating to the Avaya S8700 or S8710 Media Server 91
June 2004
NOTE:
If you have a TN799C or earlier C-LAN circuit pack, you must replace it with a
TN799DP. And if you want to use 100 Mbps speed, you must use the IP Media Processor
Amphenol Adapter and a CAT5 cable. The 259A Adapter only works with a CAT3 cable
and offers only 10 Mbps speed.
700170012
700178056
700178064
Green CAT5 Ethernet cable:
– 5-meter (16 feet)
– 25-meter (82 feet)
– 50-meter (164 feet)
1
1
1
700060643 TN2302AP IP Media Processor circuit pack 1 or more
700055015 TN799DP C-LAN circuit pack (to replace TN799C) 1 or more
848525887 IP Media Processor adapter 1/MedPro
1/C-LAN
NA CAT5 cables 1/MedPro
1/C-LAN
Table 8: Allowable Circuit Packs and Circuit Modules 1 of 3
Apparatus code Name
655A AC Power Unit—used in G650 Media Gateway
J58890MA-1
(TN801B)
CallVisor ASAI/CallVisor PC/LAN over the DEFINITY LAN Gateway R2
(MAP-D)
TN429D Analog Direct Inward/Outward Dialing (DIOD) Central Office Trunk
TN433 Speech Synthesizer—Italian
TN457 Speech Synthesizer—British English
TN459B Direct Inward Dialing (DID) Trunk—United Kingdom, 8 ports
TN464GP/
TN2464BP
DS1 Interface Trunk—T1, 24 Channel; E1, 32 Channel; Firmware Download
Enabled
TN465C Analog Central Office Trunk—multicountry, 8 ports
TN479 Analog Line, 16 ports
TN497 Tie Trunk—Italy, 4 ports
TN556D ISDN-BRI, S/T-NT Interface, 4-wire, 12 ports
TN725B Speech Synthesizer—U.S. English
TN744E Call Classifier/Detector
TN746B Analog Line, 16 ports
TN747B Central Office Trunk, 8 ports
TN753B Direct Inward Dialing (DID) Trunk, 8 ports
Table 7: Required Migration Hardware 2 of 2
Comcode Description Number
To Next Page
Loading...
