13
Installing the S8700 IP Connect
May 2002
Installing the Avaya™ S8700 Media
Server for IP Connect Configurations
This procedure is for installing a new Avaya™ S8700 Media Server for IP Connect
Configurations. As part of the procedures for configuring the various pieces of hardware, you
use 3 administration interfaces: media server web interface, Avaya Site Administration
interface, and a Linux command line interface.
The following information is included in this installation procedure:
• ‘‘Pre-Installation Setup’’ on page 14
• ‘‘Mounting Hardware in the Rack’’ on page 16
• ‘‘Configuring the Hardware in the Rack’’ on page 17
• ‘‘ Installing the Avaya G600 Media Gateway’’ on page 39
• ‘‘Cabling the Media Gateways’’ on page 59
• ‘‘Connecting to the Customer’s Network’’ on page 85
• ‘‘Installing and Wiring Telephones’’ on page 105
• ‘‘Connecting the Hardware’’ on page 163
• ‘‘Completing the Installation Administration’’ on page 166
• ‘‘Accessing the Avaya S8700 Media Server’’ on page 171
• ‘‘Testing the Complete Configuration’’ on page 177
• ‘‘Troubleshooting an Installation’’ on page 203
To Next Page
Loading...
