187
Installing the S8700 IP Connect
May 2002
Circuit Pack LEDs on Faceplate
DS1 Converter Circuit Pack LEDs
Eleven LEDs provide an indication of the state of the ‘‘TN1654 DS1 Converter Circuit Pack
LEDs’’ on page 188 and the T1/E1 facilities. The top group has the standard red, green and
yellow LEDs. The red LED indicates an alarm condition and the green LED indicates testing in
progress. The 4 SPAN LEDs indicate the status of the T1/E1 facilities. The four STATUS LEDs
are currently unused and remain off.
Figure notes
1 Alarm LED (Red)
2 Test LED (Green)
3 Busy LED (Yellow)
4 Latch Pin
5 Locking Lever
To Next Page
Loading...
