Avaya S8700 - Upgrade the IPSI Firmware (if Necessary); Enable and Disable Ethernet Switch Ports

167
Installing the S8700 IP Connect
May 2002
Upgrade the IPSI Firmware (if necessary)
The following administration is done on a computer used to access the active media server
using the media server web interface.
You may need to upgrade the firmware on some or all the IPSIs. Each IPSI must be on the same
firmware load.
1 Click View IPSI Version and select "Query All." Verify that all the IPSI circuit packs
have the same and most uptodate IPSI firmware.
2 If the firmware needs to be updated on any of the IPSI circuit packs, refer to Upgrade
Software and Firmware for information on downloading and upgrading the IPSI
firmware.
Enable and Disable Ethernet Switch Ports
The following administration is done on the services laptop computer connected to the active
media server using the S8700 Media Server Web Interface.
1 Click Enable/Disable Ethernet Switch Ports to enable the Ethernet ports being used
and to disable the unused Ethernet ports