Avaya S8700 - Test the External Connection to the LAN

95
Installing the S8700 IP Connect
May 2002
Test the External Connection to the LAN
To test the external IP connections, ping the C-LAN or IP Media Processor server and ping a
known computer connected to the network. If everything is configured correctly, the Result
column on the Ping Results screen reads pass. If it reads abort, verify the IP-address
information and check the connectivity, including the cabling.
1 Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press Enter. The variable
nnn.nnn.nnn.nnn is the IP address of the TN2302AP IP Media Processor and UUCSS is
the cabinet, carrier, and slot of the TN2302AP IP Media Processor.
2 Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press Enter. The variable
nnn.nnn.nnn.nnn is the IP address of the customer’s gateway and UUCSS is the
cabinet, carrier, and slot of the TN2302AP IP Media Processor.
3 Type ping ip-address nnn.nnn.nnn.nnn board UUCSS and press Enter. The variable
nnn.nnn.nnn.nnn is the IP address of another computer beyond the gateway and
UUCSS is the cabinet, carrier, and slot of the TN2302AP IP Media Processor.
The TN2302AP IP Media Processor is now installed in the media gateway and connected to the
IP network.
ping ip-address 192.168.10.21
PING RESULTS
End-pt IP Port Port Type Result Time(ms) Error Code
192.168.10.21 01A13 MEDPRO PASS 10 1124